MAG-RAM™ Self-Cleaning Magnet

Magra Self Cleaning Magnet

USDA Dairy Accepted

Models available


The MAG-RAM™ magnet separator is a versatile machine designed to collect ferrous metal fragments without human interaction for cleaning. MAG-RAM™ is a self-cleaning grate magnet that pneumatically retracts each magnet rod to wipe the magnetic materials to the end of the rod and into a collection chamber at the back of the magnet housing.

Unlike other self-cleaning magnets where standard air cylinders retract all the rods at once, each “RAM” of the MAG-RAM™ is a self-contained air cylinder with the magnetics built into the cylinder rod. Just as with all MAGNATTACK™ products the magnet cartridges are vacuum resin encapsulated inside the stainless steel rod to create the most robust magnet circuit available.

And with each rod able to act independently of each other you can clean one rod at a time allowing for continuous product flow during cleaning cycles. A mechanism in each RAM rotates the rod slightly each time it is retracted for cleaning. This action “dumps” loose powder from the top of the rod into the product stream, reducing waste, and it assures even wear of the rod from product abrasion.

Automatic cleaning can take place both during production, and before or after production runs. Applications for the MAG-RAM™ self-cleaning magnet range from the extraction of work hardened stainless steel, wear iron and tramp metal from sugar, grain, and other bulk products. The units can be sized to suit existing chutes and hoppers and replace existing low strength or inefficient grate magnet configurations.


  • A self-cleaning magnetLedge free housing interior
  • Variable bar centers to suit product flow
  • Optional vibrator retrofit
  • Stainless steel construction
  • USDA Dairy Accepted models, suitable for hygienic sensitive applications such as dairy and baby food powders.


  • A self-cleaning magnetRE80™ or RE80™ HT Ultra High Energy Magnet Element options, greater than 10,000 Gauss
  • Withstands cleaning temperatures to 302°F – Safe to hot water blast (HT models)
  • Non-magnetic ends protected from product flow
  • Seal welded and vacuum encapsulated for extended magnet strength life
  • Energy and magnetic design maximizes extraction of weakly magnetics such as rust, work hardened SS and magnetic stone, as well as ferrous tramp


  • A self-cleaning magnetProduct security
  • Reduce OSHA issues caused from cleaning heavy magnets
  • Eliminate risk of metal fragment issues caused by magnets not being cleaned (no operator error)
  • Machinery and plant protection

Grate magnets manufactured by MAGNATTACK™ are supplied complete with documented gauss strength at the time of supply. MAGNATTACK™ is internationally HACCP endorsed for their high grade equipment, respective documentation and document procedures relating to metal fragment control.

How it Benefits You: The MAG-RAM™ is a self-cleaning magnet that eliminates the risk of metal fragment issues caused by magnets not being cleaned. Reduces chance of operator injury and removes hygiene risks associated with operator contact. High energy RE80™ and RE80™ HT magnetics designed to offer a high level of metal fragment control to increase food safety and reduce risk of metal contamination.

To learn more about the MAG-RAM™ self-cleaning magnet, read the fact sheet to the right.
Products are manufactured from

Learn more about MAG-RAM™ Self Cleaning Solutions