Minneapolis, MN June 2, 2009 — www.powder-solutions.com – Powder-Solutions, Inc., American distributors of the USDA accepted/3A certified BFM® fitting, has released a case study detailing significant improvements in working conditions for employees of medical technology company Amedica. Courtesy of the BFM® fitting, powder processed by Amedica is now securely contained within processing connections rather than released into the air.

Amedica, creators of revolutionary spinal implants, processes medical grade silicon nitride ceramic powder which is as fine as talc prior to processing. Before installing the BFM® fitting, a seamless and air-tight polyurethane sleeve and customizable spigot system, powder would consistently infiltrate processing connections.

“A sand cloud is the best way I can describe it,” states Jeff Goodell, Director of Facilities and Maintenance at Amedica, as he describes the working atmosphere in the powder plant. “We tried everything from rubber hose clamps to duct tape to contain this powder but it was ultimately too fine to hold.”

To minimize the risk of powder inhalation, expensive respirators had to be worn by Amedica employees at all times. To ensure a sanitary environment, Amedica employees spent nearly six hours every other day scrubbing caked-on powder off processing equipment.

“Jeff and I began working through the consultation phase when he sent me detailed drawings of the bulk powder processing facilities at Amedica,” states Marv Deam, CEO of Powder-Solutions, distributors of the BFM® fitting. “In turn, I drew specs showing how the BFM® fitting could be customized for each piece of equipment.”

After merely two weeks of consultation, Deam and Powder-Solutions customized a BFM® fitting system, which included spigots and replaceable sleeves, for the bulk powder processing facilities at Amedica.

“From the day I first turned on our bulk powder processing equipment with the BFM® fitting installed, I was amazed,” continues Goodell. “There was no more sand cloud and absolutely zero powder infiltrated from the sleeve.”

Zero powder leaking between processing connections meant no risk of powder inhalation and no need for six hours of cleaning every other day. Not only were Amedica employees working in a more sanitary environment, labor costs were cut as frequent cleaning was no longer needed.

“The BFM® fitting works like a champ,” concludes Goodell. “I don’t know how else to say it.”

Visit Powder-Solutions’ website to download the full case study, “BFM® Fitting A Breath Of Fresh Air For Bulk Powder Processors.”

ABOUT POWDERS-SOLUTIONS, INC.
Powder-Solutions, Inc. is a leading distributor of the USDA accepted/3A certified BFM® fitting, the first flexible industrial connective solution specifically designed to replace the standard flexible sleeve and hose clamp assembly and address chronic sanitation and safety concerns for the bulk powder processing industry. By working closely with companies in the food, dairy, nutritional, pharmaceutical, chemical and other industries, Powder-Solutions, Inc. continues to develop and refine new strategies to assist these companies in achieving their business objectives via safe and innovative plant processes. For more information on Powder-Solutions, Inc. or the revolutionary BFM® fitting, visit www.powder-solutions.com.

ABOUT AMEDICA
Amedica Corporation is an emerging orthopedic implant company focused on using its silicon nitride ceramic technologies to develop and commercialize a broad range of innovative, high-performance spine and joint implants for the growing orthopedic device market. Its products currently under development include spine implants that may represent a new standard of care in the treatment of spinal injuries, diseases, and disorders based on superior durability, performance and safety.

###

BFM® Fitting, Distributed By Powder-Solutions, Significantly Improves Air Quality For Medical Technology Company was posted at Powder Solutions News & Events. | http://www.powder-solutions.com/newsroom

New York, NY May 19, 2009 — Powder-Solutions, Inc., American distributors of the USDA accepted/3A certified BFM® fitting, will meet with leaders in the food and pharmaceutical packaging industries this week at EastPack. Revealed during these discussions will be the cure for bulk powder processing sanitation concerns, common in food and pharmaceutical packaging.

Packaged food and pharmaceuticals oftentimes begin the product lifecycle as unprocessed bulk powder. Common to plague bulk powder processing plants are sanitation concerns ranging from powder build-up to leakage.

Chief culprits causing sanitation concerns in food and pharmaceutical powder plants are standard flex sleeves and hose clamps which are used as processing connections. The design of standard flex sleeves and hose clamps inherently leads to powder infiltrating connections or building up within sleeves.

An alternative to traditional flex sleeves and hose clamps, the BFM® fitting is designed to eliminate powder build-up and leakage in food and pharmaceutical powder plants. Elimination of powder sanitation concerns is a benefit inherently built into the BFM® fitting’s remarkable design.

“The BFM® fitting features a crevice free surface designed to eliminate trapped powder, and its tight snap placement eliminates the threat of powder leakage,” states Marv Deam, CEO of Powder-Solutions, Inc. “By not trapping or leaking powder, bulk powder processing plants in the food and pharmaceutical industries instantly alleviates two of the larger culprits of unsanitary working conditions.”

Comprised of two basic elements, the BFM® fitting consists of a flexible sleeve with integral top and bottom stainless steel snap bands, and two matched formed spigots (welded in place). The BFM® sleeve snaps into place quickly and accurately using only an operator’s hands, helping to ensure that the cleaning and sanitizing process is no longer a time consuming hassle.

“We are very pleased to be meeting with food and pharmaceutical packaging leaders at this week’s EastPack conference,” continues Deam. “We look forward to ensuring attendees leave armed with the knowledge to ensure safer bulk powder processing, and ultimately, safer packaged goods.”

Deam and Powder-Solutions, Inc. will be at EastPack exhibiting the BFM® fitting at Booth 4548 through June 11th at the Jacob K. Javits Convention Center in New York.

ABOUT POWDERS-SOLUTIONS, INC.
Powder-Solutions, Inc. is a leading distributor of the USDA accepted/3A certified BFM® fitting, the first flexible industrial connective solution specifically designed to replace the standard flexible sleeve and hose clamp assembly and address chronic sanitation and safety concerns for the bulk powder processing industry. By working closely with companies in the food, dairy, nutritional, pharmaceutical, chemical and other industries, Powder-Solutions, Inc. continues to develop and refine new strategies to assist these companies in achieving their business objectives via safe and innovative plant processes. For more information on Powder-Solutions, Inc. or the revolutionary BFM® fitting, visit www.powder-solutions.com.

###

Powder-Solutions Reveals Bulk Powder Processing Sanitation Cure To Food and Pharmaceutical Packaging Leaders at EastPack was posted at Powder Solutions News & Events. | http://www.powder-solutions.com/newsroom

Bulk powder processing plants, in the dairy industry, traditionally use standard flex sleeves and hose clamps as powder connectors. Habitual shortcomings of standard flex sleeves and hose clamps have long been known and include everything from powder leaking between connectors and building up within connectors.

Powder leakage and build-up are two of the most common sanitation culprits in bulk powder processing. Despite being aware of these shortcomings, bulk powder processing plants in the dairy industry could not implement an alternate solution as, until recently, one was not available.

The BFM® fitting, distributed by Minneapolis, MN based Powder-Solutions, Inc., is the alternative to traditional flex sleeves and hose clamps that have long caused unsanitary conditions in bulk dairy powder processing plants.

“The BFM® fitting features a crevice free surface designed to eliminate trapped powder, and its tight snap placement eliminates the threat of powder leakage,” states Marv Deam, CEO of Powder-Solutions, Inc. “By not trapping or leaking powder, bulk powder processing plants in the dairy industry can instantly alleviate two of the larger culprits of unsanitary working conditions.”

Comprised of two basic elements, the BFM® fitting consists of a flexible sleeve with integral top and bottom stainless steel snap bands, and two matched formed spigots (welded in place). The BFM® sleeve snaps into place quickly and accurately using only an operator’s hands, helping to ensure that the cleaning and sanitizing process is no longer a time consuming hassle.

“We are very pleased to be sharing with the dairy industry leaders attending the annual ADPI/ABI conference how the BFM® fitting will create more sanitary working conditions in bulk dairy powder processing plants,” continues Deam. “We look forward to ensuring attendees leave armed with the knowledge to ensure safer bulk powder processing, and ultimately, safer consumer goods.”

Deam and Powder-Solutions, Inc. will be exhibiting the BFM® fitting at Booth 110, today through April 28 at the Hyatt Regency in Chicago, IL.

ABOUT POWDERS-SOLUTIONS, INC.
Powder-Solutions, Inc. is a leading distributor of the USDA accepted/3A certified BFM® fitting, the first flexible industrial connective solution specifically designed to replace the standard flexible sleeve and hose clamp assembly and address chronic sanitation and safety concerns for the bulk powder processing industry. By working closely with companies in the food, dairy, nutritional, pharmaceutical, chemical and other industries, Powder-Solutions, Inc. continues to develop and refine new strategies to assist these companies in achieving their business objectives via safe and innovative plant processes. For more information on Powder-Solutions, Inc. or the revolutionary BFM® fitting, visit www.powder-solutions.com.

###

Benefits To Bulk Powder Processing Sanitation Revealed To Dairy Industry Leaders Via Powder-Solutions Display Of BFM® Fitting At ADPI/ABI Annual Conference was posted at Powder Solutions News & Events. | http://www.powder-solutions.com/newsroom

Chanhassen, MN January 19, 2009 — www.powder-solutions.com – Powder-Solutions, Inc., American distributors of the USDA accepted/3A certified BFM® fitting, will be sharing to attendees of the Northwest Food and Manufacturing Show how bulk powder processing can transform into a safe and sanitary industry in the New Year with help from the BFM® fitting.

The BFM® fitting distributed by Minneapolis, MN based Powder-Solutions, Inc, is an alternative to traditional flex sleeves and hose clamps, commonly used for connections in bulk powder processing plants.

Traditional flex sleeves and hose clamps had been the most commonly used connector in powder processing for decades, despite habitual shortcomings including loose fit and difficult installation processes. Shortcomings of traditional flex sleeves and hose clamps can lead to trapped powder in equipment or worker injury during installation.

“Ensuring that equipment is installed correctly, and does not trap powder product, can greatly alleviate sanitation and safety concerns in bulk powder processing,” states Marv Deam, CEO of Powder-Solutions, Inc.’s. “The BFM® fitting’s crevice free surface was designed to eliminate trapped powder, and its tight snap placement ensures quick & easy replacement.”

Comprised of two basic elements, the BFM® fitting consists of a flexible sleeve with integral top and bottom stainless steel snap bands, and two matched formed spigots (welded in place). The BFM® sleeve snaps into place quickly and accurately using only an operator’s hands, helping to ensure that the cleaning and sanitizing process is no longer a time consuming hassle.

“We are very pleased to be exhibiting how the BFM® fitting is helping to create safer bulk powder processing plants,” continues Deam. “We look forward to ensuring this week’s attendees leverage our experiences in the bulk powder processing industry to ensure safety in bulk powder processing ending in safer consumer goods.”

Deam will be exhibiting the BFM® fitting today through January 21st at Northwest Food Manufacturing & Processing Expo being held in the Oregon Convention Center in Portland, Oregon.

To learn more about the BFM® fitting and how it is helping to create safer bulk powder processing plants, please visit http://www.powder-solutions.com/.

ABOUT POWDERS-SOLUTIONS, INC.
Powder-Solutions, Inc. is a leading distributor of the USDA accepted/3A certified BFM® fitting, the first flexible industrial connective solution specifically designed to replace the standard flexible sleeve and hose clamp assembly and address chronic sanitation and safety concerns for the bulk powder processing industry. By working closely with companies in the food, dairy, nutritional, pharmaceutical, chemical and other industries, Powder-Solutions, Inc. continues to develop and refine new strategies to assist these companies in achieving their business objectives via safe and innovative plant processes. For more information on Powder-Solutions, Inc. or the revolutionary BFM® fitting, visit www.powder-solutions.com.

###

Bulk Powder Processing Solution On Display This Week At Northwest Food Manufacturing & Packaging Expo was posted at Powder Solutions News & Events. | http://www.powder-solutions.com/newsroom

Chanhassen, MN November 13, 2008 — www.powder-solutions.com — Powder-Solutions, Inc., American distributors of the USDA accepted/3A certified BFM® fitting, is helping ensure food safety in bulk powder processing plants by reducing risks of cross contamination. Food allergens such as lactose and peanut residue can contaminate other food products processed on the same bulk powder processing line.

The Threat:
There are eight foods that account for 90% of allergic reactions: peanuts, tree nuts (walnuts, pecans, etc.), fish, shellfish, eggs, milk, soy, and wheat. Eleven million people in the U.S. are estimated to suffer from food allergies, and many are no stranger to ER visits. According to Journal of Allergy and Clinical Immunology, 150 to 200 of these ER visits end in death each year. This has become an important consumer issue, with increasing regulation. Currently, there is no known cure for a food allergy. Avoidance is the only way to prevent an allergic reaction to food.

“Today, most bulk powder processing plants producing powdered food ingredients utilize standard flexible connectors and hose clamps in their processing lines,” states Marv Deam, CEO of Powder Solutions, Inc. “Among their numerous shortcomings, these old style connectors are difficult and time consuming to remove and sanitize, and present a very real risk of cross contamination when the line is switched to a new product.”

The BFM® fitting eliminates this risk of food contamination — just in time for Thanksgiving.
“Knowing if an allergen is contained in a particular food is a big problem for individuals with food allergies,” said Jason Young, Quality Control Specialist for the Oklahoma Food and Agricultural Products Research and Technology Center. “Manufacturers are responsible for ensuring that food is not adulterated or contaminated with products that could cause an allergic reaction to consumers.”

The BFM® fitting distributed by Powder-Solutions, Inc, is the solution to the problem of cross contamination risk. Comprised of two basic elements, the BFM® fitting consists of a flexible sleeve with integral top and bottom stainless steel snap bands, and two matched formed spigots (welded in place). Designed with a crevice free interior surface, the BFM® fitting does not trap powder. This makes the connector easy to clean and sanitize, and minimizes the chance for cross contamination.

The BFM sleeve snaps into place quickly and accurately using only an operator’s hands, helping to ensure that the cleaning and sanitizing process is no longer a time consuming hassle. By replacing the old style flexible sleeve and hose clamp, the BFM® fitting can assist food ingredient manufacturers in producing pure unadulterated product.

With the BFM® fitting, powder leakage and powder buildups are no longer a problem. The smooth crevice free design ensures that product flows efficiently and smoothly through process piping, ensuring bulk powder processing plants are clean, efficient, and safe environments providing safe food products for consumers.

A full video of how the BFM® fitting is eliminating cross contamination in bulk powder processing plants, can be found at http://www.powder-solutions.com/.

About Powder-Solutions, Inc.:
Powder-Solutions, Inc. is a leading distributor of the USDA accepted/3A certified BFM® fitting, the first flexible industrial connective solution specifically designed to replace the standard flexible sleeve and hose clamp assembly and address chronic sanitation and safety concerns for the bulk powder processing industry. By working closely with companies in the food, dairy, nutritional, pharmaceutical, chemical and other industries, Powder-Solutions, Inc. continues to develop and refine new strategies to assist these companies in achieving their business objectives via safe and innovative plant processes. For more information on Powder-Solutions, Inc. or the revolutionary BFM® fitting, visit www.powder-solutions.com.

###

Powder-Solutions BFM® Fitting Reduces Allergen Risk In Powdered Food Ingredients was posted at Powder Solutions News & Events. | http://www.powder-solutions.com/newsroom

Chanhassen, MN October 2, 2008 — Powder-Solutions, Inc., American distributors of the USDA accepted/3A certified BFM™ fitting, expresses the need for bulk powder processing plants to incorporate appropriate explosion mitigation procedures and equipment to ensure the safety of both plant and personnel.

Over the past 30 years, more than 300 dust explosions have killed more than 120 workers in grain silos, sugar plants, and food processing plants. In 2008, after a catastrophic dust explosion in a Georgia sugar factory, the U.S. House of Representatives passed a bill requiring the Occupational Safety and Hazards Administration (OSHA) to set standards for regulating combustible dusts.

All this has been carefully observed by Marv Deam, CEO of Powder-Solutions, Inc., and he believes his company has a worthwhile product to offer any industry dealing with production of bulk powders, dusts, or granular products. “Now more than ever, it is imperative that bulk powder processing plants are prepared with equipment that not only is efficient during processing, but also protects from the possibility of plant explosions,” states Deam. “Sophisticated explosion venting and suppression systems can only be successful if the primary explosion is contained within the process equipment. Independent lab tests have confirmed that whereas the hose clamp is likely to leak in the event of an internal explosion, the BFM™ fitting distends with the sudden pressure shock, but it does not fail.”

Available from Powder-Solutions since 2007, the BFM™ fitting was initially designed for food and pharmaceutical production facilities to stop powder leakage from process piping. “We see now that there are opportunities in disparate industries, where the inherent design of the BFM™ fitting has great potential to increase safety in a wide variety of industrial applications.”

The BFM™ fitting system represents a new paradigm in flexible connectors. Instead of slipping over the outside of process piping or connections, the BFM sleeve snaps securely and perfectly into the inside of the matched spigots. Where old style connectors required the use of a hose clamp with all its inherent flaws, the BFM™ fitting simply snaps into place without the use of external clamps or the tools needed to secure them. There are no crevices to trap powder in the line and no cracks to leak powder to atmosphere. There are no wear points to abrade and degrade that could release in the event of an internal explosion. By virtue of the integral internal snap band seals, the BFM™ fitting actually seals even tighter in such events.

“Unique in its resistance to over pressure incidents, the BFM™ fitting is not only an efficient connective solution, it is a significant safety measure,” continues Deam. “From industries as varied as dairy and food to pharmaceutical and chemical to wood production, the BFM™ fitting is an effective tool in an overall explosion mitigation strategy.”

A full video of how the BFM™ fitting is replacing traditional hose clamps in bulk powder processing, can be found at http://www.powder-solutions.com/.

ABOUT POWDERS-SOLUTIONS, INC.
Powder-Solutions, Inc. is a leading distributor of the USDA accepted/3A certified BFM™ fitting, the first flexible industrial connective solution specifically designed to replace the standard flexible sleeve and hose clamp assembly and address chronic sanitation and safety concerns for the bulk powder processing industry. By working closely with companies in the food, dairy, nutritional, pharmaceutical, chemical and other industries, Powder-Solutions, Inc. continues to develop and refine new strategies to assist these companies in achieving their business objectives via safe and innovative plant processes. For more information on Powder-Solutions, Inc. or the revolutionary BFM™ fitting, visit www.powder-solutions.com.

###

BFM™ Fitting Distributed by Powder-Solutions, Inc. Helps Reduce Risks of Bulk Powder Processing Plant Explosions was posted at Powder Solutions News & Events. | http://www.powder-solutions.com/newsroom

Chanhassen, MN August 19, 2008 — Powder-Solutions, Inc., American distributors of the USDA accepted/3A certified BFM™ fitting, is helping to diminish cross contamination and chronic powder leakage that is associated with typical hose clamps and flex sleeves used in bulk powder processing.

“Today’s bulk powder processors know that hose clamps can be difficult to fit. This improper fitting can cause powder to leak into the atmosphere, creating potentially hazardous air quality conditions. Additionally, sloppy fit can contribute to product build-up and cross contamination” states Marv Deam CEO of Powder-Solutions, Inc. “We are proud to offer the BFM™ fitting to bulk powder processors in an effort to reduce these problems”

Cross contamination can lead to illnesses in consumers and recalls of bulk powder products, ultimately contributing to huge liability costs for manufacturers and processors.

In an effort to eliminate these sanitation and safety risks, bulk powder processors nationwide are now working with Powder-Solutions, Inc. to incorporate the BFM™ fitting in their plants.

By providing a perfectly sealed and crevice free fit, the BFM™ fitting helps avoid cross contamination of products. The positive seal eliminates product leakage and improves plant air quality. The snap-in tool free replacement process ensures a perfect fit every time.

“Flat out, the BFM™ fitting results in safer and cleaner bulk powder processing,” continues Deam. “The BFM™ fitting is very quickly revolutionizing bulk powder processing.”

A full video of how the BFM™ fitting is replacing traditional hose clamps in bulk powder processing, can be found at http://www.powder-solutions.com/

About Powder-Solutions, Inc.
Powder-Solutions, Inc. is a leading distributor of the USDA accepted/3A certified BFM™ fitting, the first flexible industrial connective solution specifically designed to replace the standard flexible sleeve and hose clamp assembly and address chronic sanitation and safety concerns for the bulk powder processing industry. By working closely with companies in the food, dairy, nutritional, pharmaceutical, chemical and other industries, Powder-Solutions, Inc. continues to develop and refine new strategies to assist these companies in achieving their business objectives via safe and innovative plant processes. For more information on Powder-Solutions, Inc. or the revolutionary BFM™ fitting, visit www.powder-solutions.com.

###

Powder-Solution’s BFM™ Fitting Dramatically Reduces Safety Risks in Bulk Powder Manufactures and Consumers was posted at Powder Solutions News & Events. | http://www.powder-solutions.com/newsroom

Minneapolis, MN April 17, 2008 — www.powder-solutions.com – Powder-Solutions, Inc., American distributors of the USDA accepted/3A certified BFM™ fitting, announces its launch of the BFM™ fitting into the American market. By replacing the traditional flex sleeve and hose clamp assembly, this innovative industrial connector solves persistent sanitation, safety, and efficiency problems common in bulk powder industries.

“The recurring headaches with standard flex sleeves and hose clamps was the inspiration behind the creation of the BFM™ fitting,” states Mike Salvador, president of Powder-Solutions, Inc. “The BFM™ fitting is an alternative that is not only easier and more affordable, but results in safer, cleaner powder processing.”

The BFM™ fitting was designed to ensure the highest degree of sanitation, safety, and efficiency for companies in bulk powder industries, particularly:

• Dairy
• Food/Nutritional
• Pharmaceutical
• Chemical

For decades, flex sleeve/hose clamp connectors had been the only practical alternative for companies involved in bulk powder processing. Habitual shortcomings associated with traditional flex sleeve/hose clamps have been an issue for years because of their loose fit, compromising sanitation and creating dusty work environments. Worse, hose clamps could be subject to over-pressure leakages, contributing to potentially deadly plant explosions.

The BFM™ fitting ensures a safer, cleaner environment. Its tight fit and unique design virtually eliminate powder buildups and leakages. Tool free removal and replacement is made possible with snap fit installation that can be accomplished easily and reliably without extensive operator training. Plant safety is also supported by the inherent tendency of the BFM™ fitting to seal even tighter in the event of increased pressure.

“It may be odd to think that such a simple component can contribute to such a radically improved work environment,” added Marv Deam, CEO of Powder-Solutions, Inc. “But the BFM™ fitting does just that, while eliminating much of the aggravation inherent in the antiquated sleeve and clamp model.”

Visit Powder-Solutions, Inc.’s website for more information on the BFM™ fitting, including an educational video on its installation.

ABOUT POWDER-SOLUTIONS, INC.
Founded in 2008, Powder-Solutions, Inc. is a leading distributor of the USDA accepted/3A certified BFM™ fitting, the first flexible industrial connective solution specifically designed to replace the standard flexible sleeve and hose clamp assembly and address chronic sanitation and safety concerns for the bulk powder processing industry. By working closely with companies in the food, dairy, nutritional, pharmaceutical, chemical and other industries, Powder-Solutions, Inc continues to develop and refine new strategies to assist these companies in achieving their business objectives via safe and innovative plant processes. For more information on Powder-Solutions, Inc, or the revolutionary BFM™ fitting, visit www.powder-solutions.com.

###

Flex Sleeve/Hose Clamp Aggravation Eliminated With New Connector Designed For Bulk Powder Industries was posted at Powder Solutions News & Events. | http://www.powder-solutions.com/newsroom